DIY FOOT SANITIZER
HELLO MY NAME IS AADITYA AND I AM 14.
I AM IN 9TH GRADE. AND I HAVE DESIGNED A FOOT SANITIZER. I THOUGHT OF AN IDEA THAT EVERYONE WASHES THEIR HAND BUT THEY NEVER WASH THEIR FOOT PROPERLY. SO I DESIGNED THIS PROJECT.
I AM IN 9TH GRADE. AND I HAVE DESIGNED A FOOT SANITIZER. I THOUGHT OF AN IDEA THAT EVERYONE WASHES THEIR HAND BUT THEY NEVER WASH THEIR FOOT PROPERLY. SO I DESIGNED THIS PROJECT.
Body
I HAVE DESIGNED THIS 3D MODEL IN AUTODESK TINKERCAD.
CIRCUIT
HERE I HAVE USED A PROXIMITY SENSOR TO CONTROL THE PUMP.
COMPONENTS:
"PROXIMITY SENSOR"
"DC PUMP"
"1K RESISTOR"
"TIP 32C"
"USB CABLE"
COMPONENTS:
"PROXIMITY SENSOR"
"DC PUMP"
"1K RESISTOR"
"TIP 32C"
"USB CABLE"
SPRINKLER
LAST STEP IS TO ADD THE SILICON PIPE AND CONNECT THE NOZZLE.
COMPLETED
AFTER THE PREVIOUS STEP THE PROJECT IS COMPLETE.
THE ABOVE PICTURE IS FOR AUTHENTICATION.
NOTE:DUE TO LACK OF TIME I WAS NOT ABLE TO MAKE THE CASE OF THE PROJECT.
PLEASE CONSIDER....
THE ABOVE PICTURE IS FOR AUTHENTICATION.
NOTE:DUE TO LACK OF TIME I WAS NOT ABLE TO MAKE THE CASE OF THE PROJECT.
PLEASE CONSIDER....