DIY Electric Shocker

by Mad Gyver in Circuits > Gadgets

39108 Views, 59 Favorites, 0 Comments

DIY Electric Shocker

DSC_7653.MOV_20170328_121751.069.jpg
MAH00311.MP4_20170328_121830.453.jpg
DSC_7498.MOV_20170328_121225.377.jpg
How to make electric shocker. DIY high voltage teaser

This instructable is about how to make electric shocker with high-voltage booster. I made it inside PVC tube like classic DIY style. This handmade shocker can't make serious harm, but it hurts =)

Easy and cheap to make, this electric shocker can fright off some dogs, and also you can enjoy with teasing yourself, like I do in the video =) Below you can find all components to make electric shocker by yourself.

► Components

✓ Booster 1000 kV http://ali.pub/hia76

✓ Batteries http://ali.pub/hia76

✓ Holder http://ali.pub/hia76

✓ Switch http://ali.pub/hia76

✓ Button http://ali.pub/hia76

✓ Button http://ali.pub/hia76

Also you can watch all process of making this shocker in this video!

Drilling Holes

DSC_7560.MOV_20170328_121304.689.jpg
DSC_7560.MOV_20170328_121346.584.jpg
DSC_7561.MOV_20170328_121402.920.jpg

Use cone drill to make holes for button and switch

Connecting Wires

DSC_7566.MOV_20170328_121421.088.jpg
DSC_7534.MOV_20170328_123412.023.jpg
DSC_7569.MOV_20170328_121445.134.jpg
DSC_7569.MOV_20170328_121449.447.jpg
DSC_7573.MOV_20170328_121503.294.jpg

Connect batteries to HV module like on the photo

Electrodes

DSC_7579.MOV_20170328_121516.030.jpg
DSC_7601.MOV_20170328_121550.215.jpg
DSC_7602.MOV_20170328_121556.990.jpg
DSC_7650.MOV_20170328_121742.334.jpg
DSC_7607.MOV_20170328_121625.883.jpg
DSC_7608.MOV_20170328_121635.198.jpg

Make electrodes from screws. Connect them, fix on the bottle's cap, fill entire space of shocker with hot glue or silicone seal, then fix cap on the body of shocker.

Decoration

DSC_7614.MOV_20170328_121646.425.jpg
DSC_7648.MOV_20170328_121728.333.jpg

Use insulation tape to make your shockker look like bee, and add some rope to handle.

Putting Batteries

DSC_7619.MOV_20170328_121706.685.jpg
DSC_7619.MOV_20170328_121709.470.jpg
DSC_7619.MOV_20170328_121711.983.jpg

Shove holder inside the cap. Then insert cap inside the tube - shocker's body.

Adding Spark Gap

MAH00313.MP4_20170328_121843.277.jpg

Use thick wire to make some spark gap between electrodes

TEASE ME, BABY!

MAH00345.MP4_20170328_121916.574.jpg
DSC_7656.MOV_20170328_121809.829.jpg
MAH00345.MP4_20170328_121927.902.jpg
How to make electric shocker. DIY high voltage teaser

Oh yeah, it hurts! You can watch the video, I tease myself few times =)

Good Luck!