DIY Custom Matt Black Macbook Pro - Plasti Dip
by superaudiomadras in Circuits > Apple
19722 Views, 176 Favorites, 0 Comments
DIY Custom Matt Black Macbook Pro - Plasti Dip
Macbook pro retina display with Rust-Oleum Peel Coat (Like Plasti Dip)
1) Mask off ports
2) Clean Surface
3) Sprayed five coats of Peel Cost ( More = Thicker finish)
4) Peel off logo
5) Allow to dry for 24 hours
Mask Out Ports
Clean Surface.
Make sure it is spotless
Shake Plasti Dip / Peel Coat
Paint
Start with a very light coast and build up.
1 coat every 10-15 mins
I did a total of 5 coats
Remove Making Tapes
Remove masking tape and paper before paint drys and sticks to the macbook
Peel Off the Logo
Peel off the logo 10-15 minutes after the last coat.
Allow to Dry for 24 Hours
You can start using it but if you want it to last longer allow it to dry for 24 hours before using your computer