DIY Clay Plushie Headband + Doggy Bone and Ball

by WolfieWildDog in Craft > Clay

181 Views, 2 Favorites, 0 Comments

DIY Clay Plushie Headband + Doggy Bone and Ball

IMG_20210328_081207.jpg

This is super fun if you have extra clay.

Supplies

A lot of air dry clay and stuffed animal. Optional: If you don't want a mess, just put cardboard under the clay.

For the Headband: Roll Some Clay

IMG_20210328_074214.jpg

Roll some clay into a long strip. Measure the stuffed animal's head and see if it will fit.

For the Headband: Collide

IMG_20210328_074235.jpg

Collide the ends of the strips together and you will have it done!

For the Headband: Decorate!!!

IMG_20210328_074421.jpg
IMG_20210328_074440.jpg
IMG_20210328_074449.jpg
IMG_20210328_074454.jpg

You may have to wait for the clay to dry to paint it but you can add on accessories like a bow at the end. Either way, it's your art. :)

For the Ball: Roll

IMG_20210328_075235.jpg

Roll some clay into a ball. Roll until it has a smooth texture.

For the Ball: Strip

IMG_20210328_075327.jpg

Do the same kind of strip we did for the headband only a bit smaller and into 3 strips.

For the Ball: Finishing Up

IMG_20210328_075450.jpg
IMG_20210328_075454.jpg

Make the strips into circles like we did for the headband (just collide the sides together) and place them on however and wherever you want. (Add some yellow paint if wanting a tennis ball color) Now your done!!!! Enjoy! :)

For the Bone: Roll

IMG_20210328_080732.jpg

Roll a very wide strip of clay. (not long)

For the Bone: Shape and Finished

IMG_20210328_080938.jpg

Shape the strip until it has "bone looking" sides. The picture will show you what I mean.. Now you just texture it if you want or paint it once it's dry. Enjoy! :)

Thanks for at Least Reading This! :)

IMG_20210328_081207.jpg

Byeeeeeee