DIY Cassing Digital Clock Dot Matrix With Canal U Cable Instalation

This project is to make cassing my clock dot matrix in my posting on this https://www.instructables.com/id/Made-Clock-Matrix-With-192-LED/

You just need canal U to instalation panel, use the Cup not canal U.

Use the Saw to cut this, on this project i used dimension 12 x 22 cm

cutting edges 45 degrees

cut to width canal U, cut into 2, used glue to make it strong..

The Finnally, this project is like this. you can use Acrelic to infront and use wood in back of this box.