DIY Cable Cam

In this instructable i am going to show you how to make a cable cam. A cable cam is used to film people going at high speeds downhill. 

advantages -

 - very cheep
 - you can make it powered in the future.

What you will need:

pulleys (with hooks)
Fender washers (lots)
Piece of wood (to mount everything on)
Nuts and bolts

Drill 5 holes equaly apart on your piece of wood.

Add your fender washers to two of your screws (make the equal weights).

Put the weights through your piece of wood and tighten it up

Add the pulleys to the end holes.

Add another screw to the centre hole.

FINISHED !