DIY Bullet Bracelet

I this tutorial I'll show you how I made this awesome Bullet Shell Bracelet.

Check out the video first.

To make this bracelet I was using:

Bare Copper Electrical Wire Gauge 6/7 (7 pieces of 6 gauge wire combined in one, if it make sense)
10mm Climbing Rope
2 Used 40 caliber Bullet Shells
Led free plumbing solder
Plumbing Flux
Small Vice
Gas Torch
Pliers
Jewelry saw

I got this copper cable as it is from a hardware store. I'm using it as the base for my bracelet. This cable is combined of 7 bare copper wires of 6ga each.

7 inches of this cable is a perfect length to make a bracelet that will fit any wrist.

Next I used a small anvil, hammer and pliers to bend this cable in a C shape. You can use any wooden stick to bend it around.

To make sure that all the wires will stay in place I've decided to solder the ends of the cable.

Flux, solder and a blow torch are required to it.

I wrapped my bracelet with an outer shell of a 10mm climbing rope. Then I secured the ends of the rope with a string and melted them with a lighter.

40 caliber bullet shells where used as end caps for my bracelet. Hot glue is flexible and has the best grip for this rope material.

I'm wearing my bracelet every day. It has a solid core and feels very nice and sturdy.

Check out my Youtube channel for more cool projects like this!