DIY Bubble Fountain

Materials Needed:

• Acrylic Sheet
• Air Pump
• Aquarium Pipe
• Blue Waterproof LED
• LED Adapter
• Wood
• Black Tape
• Spray Colour
• Hot Glue
• Super Glue
• Silicon Sealant

Tools Needed:

• Cutter
• Needle
• Drill

So Let's start...

• We need 2 Acrylic sheet of 23cm height and 2cm width.
• Attach Waterproof LED on 1 sheet.
• Take an aquarium pipe and seal one end with hot glue.
• Then place the pipe on that sheet with hot glue.
• Take a needle and make some holes on the pipe.
• Then take a drill and make a hole on the other pc of the acrylic sheet

Watch the full video on YouTube and don't forget to SUBSCRIBE and SHARE

Then we need 2 more Acrylic sheets of 13.5cm height and 2cm width.

• Take the drill and make a hole on 1 sheet, so the pipe passes through.
• Make 1 more small hole just below the last hole, so the electric wire of LED passes through.
• Now colour the 4 acrylic sheets with Black spray colour.

Now we need an Acrylic sheet of 18cm height and 25.5cm width.

• Attach black tape on the sheet.
• Then turn the sheet and put silicon sealant.
• Take the 4 pcs of acrylic sheets and place them.

Then we need an Acrylic sheet of 14cm height and 23cm width.

• Colour the sheet with Black spray colour.
• Put silicon sealant on the top of the 4 sheets and place this sheet on it, and let it dry for 24 hrs.

• Now take a wood and give a 2.5cm cut and place the structure on it.
• Connect the LED Adapter with the LED.
• Then take an Air pump and connect with the pipe.

• Switch on the LED and the pump
• Finally, fill the structure with water and enjoy the Bubble Fountain.

Watch the full video on YouTube and don't forget to SUBSCRIBE and SHARE