DIY Boxing Hand Wrap Rollers
Resently I've gotten into boxing and I try to do them as often as I can. So I got my own boxing gloves + hand wraps. so at the end of every session I have undo my handwraps and roll them up again for storage. It was a tedious and repetitive thing to do. So I looked up hand wraps rollers online, and found them rather expensive. $14 - $16. And so Idecided to make my own.
Supplies
Two Empty Old Safety Pill Bottles
2"Screw and Nut
15/64 Drill Bit
5/16" Drill Bit
Cordless Drill
Assembly and Finish
Use the bigger drill bit to punch a hole in the middle of the bottle. Then use the smaller drill bit to make a hole in the middle of the bottle cap, place the screw in the hole on the cap. Just like the picture.
Place that piece in the drill. Put the tip of the hand wrap (the one for the thumb) and drill away, slowly tho. So that the wraps will stay alined. And done. Made somthing usefull plus saved time and money.