DIY Boards Buckle

by Master-of-Hardcore in Craft > Jewelry

3629 Views, 55 Favorites, 0 Comments

DIY Boards Buckle

8 (3).JPG
Hi, in this tutorial I will show you how you build a belt buckle from an old board.

1.JPG
Tools you need:

- Hot Glue Gun
- Hobby Knife
- Dremel Tool

2.JPG
Materials you need:

- a Bucke Belt
- a piece of Iron Rod
- a Screw with Nut
- a piece of Foam

3 (1).JPG
3 (2).JPG
3 (3).JPG
Sets the board on the foam and cut around the outside.

4 (2).JPG
4 (1).jpg
Make a hole in the middle of the board with the Dremel Tool.

5 (1).JPG
5 (2).JPG
Puts the screw into the hole and fastened with the nut.

6 (1).JPG
6 (2).JPG
Forms a bow from the Iron Pipe and glue it on the Board.

7 (1).JPG
7 (2).JPG
Now glued the piece of foam on the back of the board.

8 (1).JPG
8 (2).JPG
8 (3).JPG
That's it, we're done.
Here is the finished belt buckle.

vote for me if you like it
https://www.instructables.com/contest/fullspectrum2014/
https://www.instructables.com/contest/greenelectronics/