DIY Board Guitar
This is a Board Guitar. The thing i like about it is that you can be creative and helpful
Materials
A board
Pvc pipes
A 6-inch hole saw
Fishing line
Eye screws
Lineman pliers
Hot glue
Hand saw
Drill
Drill and Cut
Drill the board with the saw at 2 places. Short space needed if wanted the pitch to be high.
Use the hand saw to cut the pvc pipes at about 3 to 4 inches
Insert, Glue and Tie
Screw the eyes into the board on each side
(Use the pliers to screw them on) Tie the line onto the screw eyes Glue the pvc pipes under the line right before the eye screws
Design and Finish
Color on your board and sand it if you want. Just make it the way you like it. You could make it with different sizes if the board is big enough.