DIY Bluetooth Speaker Output

Add a 3.5mm output to a bluetooth speaker

1. Bluetooth Speaker

2. Soldering Iron/Solder

3. Spare 3.5mm jack with cord attached

4. Scissors

5. Screw Driver

6. Wire Strippers

7. Shrink Tube (optional)

Find a way to open up the speaker. You will probably need a Screw Driver. Once open, find the circuit board.

Using Scissors or Wire Strippers carefully strip the audio wire. MAKE SURE IT IS NOT THE POWER.

Agin, Do this step carefully, strip and separate the wires

Some of the wires could be different colors but jest test them to find out.

And, Your done! Screw the speaker back together and Enjoy!