DIY, BUILD YOUR OWN DIGITAL BINARY CLOCK!!!
by jrubiogtz in Circuits > Clocks
30330 Views, 12 Favorites, 0 Comments
DIY, BUILD YOUR OWN DIGITAL BINARY CLOCK!!!
.JPG)
This Instructable shows how to build a digital clock in the simplest way. You only need a few tools and a little time ...
Introduction
.JPG)
There are two ways to build your own binary clock.
1.- One is to make your own PCB. Learning a bit of micro controllers. Have a micro recorder. Some experience in electronics and putting hands to work.
2.- But. If you like electronics and you do not have time for all of the above can use this instructable. Just go to ebay purchase a kit of construction and welded parts.
This KIY is designed for people with little or no experience on electronics. Who want to start in this world.
There is the ebay place: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=250375293631
1.- One is to make your own PCB. Learning a bit of micro controllers. Have a micro recorder. Some experience in electronics and putting hands to work.
2.- But. If you like electronics and you do not have time for all of the above can use this instructable. Just go to ebay purchase a kit of construction and welded parts.
This KIY is designed for people with little or no experience on electronics. Who want to start in this world.
There is the ebay place: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MESELX:IT&item=250375293631
.JPG)
After ordering. It is only necessary to have some tools and a little time and your watch will be ready.