DIY-BOOKSIDE "bedside Bookshelf"

Hi,

I am an industrial product design senior student. BOOKSIDE which is designed as DIY was my school project of the third class. Today, I remember to upload in order to reach more people.

Also you can have a look at the moodboard, if you want to see how I developed my project. There is a "how to make" video in the last step.

I hope that you'll like and try to do it.

I will upload the templates immediately.

Besides, I will response your questions and suggestions as soon as possible. So, don't hesitate to make comments.

Thanks and enjoy :)

Materials

• 50x50 cm fabric
• 30cmx40cm fabric
• 5m yarn

I used thick felt for fabric.

Equipment

• Fabric puncher
• Needle
• Scissors
• Metal ruler
• A4 templates
• Pen

• Lay out the template evenly on corners.
• Make 3x4 points on each 4 corners.

• Make holes with the puncher.( All of the points should be punched.)

Puncher is not a must, also you can make cross-stitching with the needle. But the puncher makes works easier.

• Cross stitch with a thick yarn and needle.
• After stitching, tie a knot.

• Use the another template for making marks.
• Put the A4 sheet 4 cm inside of the 30x40 cm fabric.
• Make point marks.
• Put the piece on the other fabric and make marks.

• Punch according to these marks.
• Cross stitch by the holes to assemble two pieces.

It is ready to use.

Put in your books and enjoy it.

Anymore there is no need to look for a night table, while you are sleepy. :)