DIY Arduino Obstacle Avoiding Car at Home

In this article i am going to show you how to make an Arduino Obstacle Avoiding car at home.

Here's the Parts List:
(Banggood.com)

1) Arduino Uno - http://bit.ly/2W4wtrC
2) Motor Driver Shield - http://bit.ly/2BC6gam
3) Wheels (4x) - http://bit.ly/2obmMez
4) TT Gear Motor (4x) - http://bit.ly/2obmMez
5) Servo Motor - http://bit.ly/2obmMez
6) Ultrasonic Sensor - http://bit.ly/2obmMez
6) 18650 Li-on Battery (2x) - http://bit.ly/2obmMez
7) 18650 Battery Holder - http://bit.ly/2obmMez
8) Male and Female Jumper wire - http://bit.ly/2obmMez
9) Acrylic Sheet - (Offline Store)
10) DC Power Switch - http://bit.ly/2obmMez

Here is all the materials you need.

Attach All the materials in place as shown in the pictures.

Upload the provided code on your robot...

-------------------------------------------------------

Download All Files : https://yaydrive.com/folder/14/DIY_Arduino_Obstacle_Avoiding_Car

-------------------------------------------------------

You can view Preview here :