DIY - Adjustable Roller Stand From Scrap

In my hobby sometimes I need cut or drilled long pieces.

I Make this roller stand for helping me.

For this, I used some scrap material:

1. Old Disc brake

2. part of "Dress Stand"

3. Print Roller

4. Strip of rubber

5. a piece of Aluminum's bar

6. Some pieces of metal

On the lathe, I make the disc adapter.

On the hydraulic press, I put the adapter in the disc then put the bar of dress stand in the adapter.

On the top, I weld some pieces of metal to build the support of roll bar.

The roller is removable if you want a stable support.