DIY Acrylic Sheet Bending Tool

by tax.123.qwer in Circuits > Tools

448 Views, 1 Favorites, 0 Comments

DIY Acrylic Sheet Bending Tool

DIY Acrylic Sheet Bending Machine

This DIY Acrylic Sheet Bending Tool is made for Acrylic sheet width up to 30 cm and made with few plywood, limit switch etc.

Basic Operation

IMG_9494 - Copy.JPG
IMG-20190325-WA0000.jpg
IMG-20190325-WA0003.jpg
IMG-20190325-WA0008.jpg
IMG-20190325-WA0014.jpg

Nichrome wire is an alloy made from nickel and chromium. It resists heat and oxidation and serves as a heating element in products such as toasters and hair dryers.

As shown in the picture we can calculate the required voltage and current from the formula based on wire temperature.

Closeup of Nichrome Wire Expansion

Closeup of Ni-chrome Wire expansion

Nichrome Wire expands as it heats-up. I have added spring in one end of the wire to expand as shown in the video.

Construction

IMG_9492 - Copy.JPG
diagram.png

As shown in the picture 4 plywood's are used and screwed together. A limit switch acts as a ON/OFF mechanism as the Acrylic sheet placed on the bender.

I have used PC ATX power supply to supply the required current.

Now it's ready to use.