DIY 3D Hologram Projector

I know I know a lot of people did this before me but I very like this idea and want to make my own. I hope enjoy mine as well the others!

I saw a lot of version made from cd case. I think cut a cd case is not the easiest way better to use thin transparent plastic from the trash ;)

I saved this box from trash and riped out the plastic part of it. Keep the paper part as well it will be used for the project later.

I made this trapeze shape from the cardboard.

The measurement:

- sort side 1 cm

- long side 6 cm

- height 3,5 cm

But you can do as big as you want the only important thing is to keep the angels on the short side at 60°.

Draw around the shape four times on the plastic sheet.

Take a scissors and cut them out. Try to be accurate.

Cut out this 6 by 6 square from the cardboard. Take some transparent adhesive tape and stick the half side of a 6 cm piece to each sides.

Stick all the cutted plastic pieces to the other half of the tape with long side.

Fold up two plastic trapezes and stick them together with tape. Repeate this step until you finished with every side!

You will get a pyramid without peak.

Take your smartphone and put it to the center of the screen and start a hologram video!

I made my own but you can find a lot of better on YouTube :)

This adaptable for tablets notebooks tvs just increase the size of the pyramid!

I hope you enjoyed this :)

That's the ShiftyWay!

As always thanks for your support!