DIY 360' Rotating Display Stand for Photography / Videography

DIY 360 Rotating Display stand from cardboard | How to make Science Projects for KIDS at HOME

Learn how to make DIY 360 Rotating Display stand from cardboard at home which is USB Powered easy science projects for kids which can also be used for product photography and 360 video preview of that product to post on your websites or even on Amazon, eBay, Flipkart for selling art objects, sculptures, art, lego star wars, lego stand etc

#diy #rotary #display #stand #cardboard #display #stand #howtomake #360 #diyathome

▶Materials Used : -Cardboard Sheets -ball bearing [medium size] -100 rpm dc motor -on/off switch -USB cable -sharpie/bid size markers -hot glue gun

▶Just follow the step by step instructions in the video and have fun by trying out by yourself !!!

▶Please leave a like and do Share my VIDEO and comment down for any suggestions or any requests for future DIY projects!!!

SUBSCRIBE to my channel for more exciting videos in the Future! ▶https://www.youtube.com/c/DIYatHOME?sub_confirmation=1 Thank You Guys For Watching :)

▶ABOUT MY CHANNEL Yo Guys. I make useful as well as playful DIY Projects & how to make videos at Home easy for you to try it out by yourself and have fun making it !!! I love making stuff by my HANDS !!! Also, your feedback on my videos in the comment section would be helpful for me to make better videos for you to learn, enjoy and have fun SUBSCRIBE to my youtube channel to be a part of my DIY journey https://www.youtube.com/c/DIYatHOME?sub_confirmation=1

Thank you guys for watching :)

Take a Medium Size Bearing ( REFER VIDEO )

Remove the Cap of the Sharpie Pen ( REFER VIDEO )

Stick to the Bearing As Shown Using Hot Glue ( REFER VIDEO )

Stick 2.5 Cm Cardboard Strip Around the Bearing ( REFER VIDEO )

As Shown in the Figure ( REFER VIDEO )

Take a USB Cable ( REFER VIDEO )

Cut at the End and Separate the Wires in It ( REFER VIDEO )

Cut the Black and White Wires Present in It ( REFER VIDEO )

Connect a 50 Rpm Dc Motor and a ON/OFF Switch As Shown in the Figure ( REFER VIDEO )

Cover the Wires Using Wire Tapes ( REFER VIDEO )

Stick a Small Piece of Gluestick on the Top of the Shaft of the Motor As Shown ( REFER VIDEO )

Take a Circular Cardboard and a Small Strip of Fine Grade Sandpaper ( REFER VIDEO )

Stick the Sandpaper at the Circumference of the Circle As Shown ( REFER VIDEO )

Stick the Bearing Portion As Shown in the Figure ( REFER VIDEO )

Place the Sharpie on the 25 Cm Square Piece of Cardboard ( REFER VIDEO )

Place the Dc Motor to the Sandpaper As Shown in the Figure ( REFER VIDEO )

Cover the Whole Portion As Shown ( REFER VIDEO )

Add a Circular Cardboard Shaped Stand on the Rotating Floor ( REFER VIDEO )

Place the Main Big Circle Floor As Per Your Requirement ( REFER VIDEO )

Cover the Top Surface With White Paper ( REFER VIDEO )

And You Are Good to Go ... This DIY Project Is Complete

Please Refer My Youtube Video for Step by Step Visual Explaination ..And Also Share This Videos With Your Friends and Family and Subscribe to My Channel for More Exciting DIY Projects