DIY 300 to 75 Ohm TV Antenna Coaxial Baluns
by supergilligan in Circuits > Electronics
76680 Views, 28 Favorites, 0 Comments
DIY 300 to 75 Ohm TV Antenna Coaxial Baluns
![reassemble[1].jpg](/proxy/?url=https://content.instructables.com/FUX/W97G/H3Z3TWXW/FUXW97GH3Z3TWXW.jpg&filename=reassemble[1].jpg)
![balun1[1].jpg](/proxy/?url=https://content.instructables.com/FZ5/OFW2/H3Z3TWY0/FZ5OFW2H3Z3TWY0.jpg&filename=balun1[1].jpg)
Here are 2 sites I found with information on how to make Television Baluns.
However, depending on your situation though, You might just go to the Deseret Industries and pick a professionally made Balun for 50ยข.
However, depending on your situation though, You might just go to the Deseret Industries and pick a professionally made Balun for 50ยข.
Find Parts and Start DIYing
The websites I have found so far are below.
http://homepage.mac.com/kenwetzel/Low_Loss_Balun.htm
http://flynwill.rosshay.com/Electronics/antIso/
This site has the most information and schematics
http://antiqueradios.com/forums/viewtopic.php?f=2&t=171510&start=40
Have fun DoInstructibleYourselfing.
http://homepage.mac.com/kenwetzel/Low_Loss_Balun.htm
http://flynwill.rosshay.com/Electronics/antIso/
This site has the most information and schematics
http://antiqueradios.com/forums/viewtopic.php?f=2&t=171510&start=40
Have fun DoInstructibleYourselfing.