DIY 3-In-1 Hand-Held Fan: Car Cooler, Solder Fume Extractor, Hair Dryer

This was made with an ultra powerful 12 VOLTS 0.42 AMP fan.

First I soldered long wires to the connector wires on the fan, Then I soldered to the long wires a with the correct polarity to a standard 5.5 millimeter female connector so it could be connected to any male 5.5 millimeter male connector.

This could be powered by any 5.5 mm power jack that delivers 12 VOLTS:

A power supply

A car battery, And more

The shield I put on the fan was from a stereo I took apart (step 3)

Last, I hot glued the fan to an umbrella handle.

I wanted to power it with a car battery, But I wouldn't have been able to have enough light in the car for the picture so I did It with my home-made LEDPOD., which has a built in 12 VOLT car adapter.

I built a retractable solder fume remover, But when I don't feel like turning it on, Or solder in other places I use this.

Thank you for watching!

If you want to see more more projects like this one, Make sure to visit my Instructables page!

I would also really appreciate it if you vote for me in the contests I've entered!!!

Thank You :)