DIY 240W Bench Power Supply Tutorials 0V to 24V 0 to 10A

Hi Guy.Today i will show you how to DIY 240W Bench Power Supply Tutorials 0V to 24V 0 to 10A with LCD voltage and current meter. This project attach the youtube video and schematic for you can understand what did i do for make it. Thanks you very much

I make this video for you can easy understand what did i do for make this, in this video have some Advertising. Hope you like my video.

This schematic i make from eagle software. The main IC is TL494 or( KA7500). You can download the file PDF of schematic here

Go to https://jlcpcb.com/ for make PCB online

Only 2$ /10pcs for 2 layer PCB and Big Discount on First order Shipping https://jlcpcb.com/ Upload your gerber files and fill in Shipping Adress then click PAY.

The PCB look great and so beauty

List of part here:

You can buy it from any electrical store.

1 x TL494 ( KA7500)
1 x MUR 860 Diode

2 x 5.1kilo ohm resistor

1x 3.3 kilo ohm resistor

2 x 1 kilo ohm resistor

1 x 3v led

1 x 1000uf/50v capacitor

1 x 51 ohm resistor

1 x 100ohm resistor

3 x 1kilo ohm portentiometer

1 x 10 kilo ohm portentiometer

2 x 0.1 ohm 5w resistor

1 x 222 capacitor

1 x DB140 transistor

1 x MJE13009 transistor

1 x 680 ohm resistor

1 x inductor 300uh 10A

1 x big heat sink

Solder all component to PCB. We have the name on the top PCB. So this very easy

Check all component were correct.

I connect with LCD current and voltage meter link here

The power supply from 24V 9A OLD computer modify from 12 to 24V link here

Thank for watching

Connect with me:
Facebook: https://www.facebook.com/TechnicalLong/

Twiter:https://twitter.com/DoItYourselfPL

More video here: http://bit.ly/2o9OsOz