DIN Rail Mount for Arduino YUN, UNO and Nano

by Zihatec in Circuits > Arduino

2951 Views, 4 Favorites, 0 Comments

DIN Rail Mount for Arduino YUN, UNO and Nano

ArduiBox_Kompatibilität.jpg
ArduiBox_solid_lid.jpg

Sometimes it is useful to mount your Arduino project permanently in a control cabinet - for example in home automation or industrial applications. In such cases our ArduiBox enclosure for Arduino Nano, UNO and Yun Rev2 can help you to come to a rugged solution with professional look.

In this instructable we will show you how to use Arduibox with the different Arduino boards.

Tools and Materials

ArduiBox_SET_Standard_klein.JPG

Materials:

  • Arduino UNO, Nano or YUN Rev2
  • ArduiBox Open kit
  • optional shield

Tools:

  • soldering iron
  • solder wire
  • side cutting pliers
  • needle nose pliers
  • medium cross slot screwdriver

PCB Assembly

ArduiBox_pcb_Nano_klein.JPG
ArduiBox_pcb_UNO_klein.JPG

In the first step you have to assemble the pcb on the ArduiBox kit. Please follow the attached construction manual. It is important to now which Arduino board is later used, because you can not assemble the pcb for Nano and UNO/Yun at the same time....

Pcb Mounting

Arduibox_pcb_mounting.jpg

Now you can mount the pcb in the bottom shell of the enclosure

Place the Arduino Board

ArduiBox_YUN_klein.JPG
ArduiBox_UNO_klein.JPG
ArduiBox_Nano.JPG

You can plug now the Arduino board of your choice to the main pcb

Optional Shield

IMG_20181126_085449.jpg

It is possible to mount an additional shield onto the main pcb.

Open Terminal Covers

ArduiBox_Oeffnungen.jpg

Depending on the used terminals you have to remove the terminal covers of the top shell.
These covers comes with rated break points. You can remove it with a screw driver and a nose pliers

Cabinet Mount

IMG_20181231_092143.jpg

After mounting the top shell you be ready to mount the ArduiBox in a cabinet