Cutting Sheet Metal on the Water Jet
by jamesh10000 in Workshop > Metalworking
3411 Views, 10 Favorites, 0 Comments
Cutting Sheet Metal on the Water Jet
I made it at TechShop! Find them at www.techshop.ws.
Import Dxf File
Import your dxf file into Flopath
Move Part and Select Cut Paths
Move your part where you want it to be on the cutting bed, select lines to cut, select speed.
Duplicate for Multiple Parts
Duplicate this for more than 1 item to be cut from a sheet.
Auto Path It
Use auto path to create all the cutting and traverse paths
Export
Export path as... To create the ORD file for Flocut.
Load File Into Flocut
Load file, select material.
Position Material
Square it up on the bed also
Set Temporary 0,0
Align head to corner of material and set 0,0
Dry Run
Dry run no pump or water or abrasive.
Set to Auto and Run
Set pump, water, and abrasive to auto and run!