Cutting Board in School
making a cutting bored step by step
Safety
safety is number one priority on the work site
Tools and Gear Needed
the kit you will need to build a cutting board is a chop saw, a
table saw, a belt sander, a hand sander, a router and a C and C machine and plainer and glue and clamps.
Find Wood
find a wood material that is the desired and semi flat
Cut Wood
cut wood into desired lengths i cut the wood into 12 inch pieces and then i cut them into 1.5 inch strips
Gluing
to glue the strips together you need to turn them on the side lather them in lots of glue flip back to original position and then push together and then clamp the wood nice and tight
Sanding
so after the bored is glued its all bumpy with glue so you need to plan the bored in the planner and then use the cNc machine to machine down the bored smooth
Route
use the router to make the edges of the bored round
Finish Sand
use really fine grit sand paper and make it supper smooth
Laser Engrave
use a cNc laser engraver to engrave an image if wanted
Oil
use mint oil and rub lots of oil all over it and do multiple layers