Cute Origami Fox
![fox11.jpg](/proxy/?url=https://content.instructables.com/FWS/L9MB/HW4OKMS0/FWSL9MBHW4OKMS0.jpg&filename=fox11.jpg)
Make this cute origami for with some simple folds of some colored paper.
1
![fox01.jpg](/proxy/?url=https://content.instructables.com/FZS/RPCP/HW4OKMJ0/FZSRPCPHW4OKMJ0.jpg&filename=fox01.jpg)
Start with a sheet of square paper.
2
![fox02.jpg](/proxy/?url=https://content.instructables.com/FH4/IBCF/HW4OKMJ9/FH4IBCFHW4OKMJ9.jpg&filename=fox02.jpg)
Fold the paper in half by folding the lower left corner to the upper right corner.
3
![fox03.jpg](/proxy/?url=https://content.instructables.com/FQ6/MOB1/HW4OKMJA/FQ6MOB1HW4OKMJA.jpg&filename=fox03.jpg)
Fold the left corner in to the right corner.
4
![fox04.jpg](/proxy/?url=https://content.instructables.com/FDM/E45A/HW4OKMJB/FDME45AHW4OKMJB.jpg&filename=fox04.jpg)
Fold the bottom corner to the upper right corner.
5
![fox05.jpg](/proxy/?url=https://content.instructables.com/FUD/B9VF/HW4OKML2/FUDB9VFHW4OKML2.jpg&filename=fox05.jpg)
Turn the figure over horizontally.
6
![fox06.jpg](/proxy/?url=https://content.instructables.com/FIV/U24I/HW4OKMLB/FIVU24IHW4OKMLB.jpg&filename=fox06.jpg)
Fold the upper right corner, to the lower left corner.
7
![fox07.jpg](/proxy/?url=https://content.instructables.com/FXO/E8XP/HW4OKMME/FXOE8XPHW4OKMME.jpg&filename=fox07.jpg)
Fold the entire left side just a bit before the center. The farther towards the center you fold, the bigger the head will be.
8
![fox08-2.jpg](/proxy/?url=https://content.instructables.com/FJU/JSZ7/HW4OKMNI/FJUJSZ7HW4OKMNI.jpg&filename=fox08-2.jpg)
![fox08.jpg](/proxy/?url=https://content.instructables.com/F2X/E5Z6/HW4OKMNH/F2XE5Z6HW4OKMNH.jpg&filename=fox08.jpg)
Grab the bottom corner of the outside flap and open. The fox's head will begin to fold down by itself.
9
![fox09.jpg](/proxy/?url=https://content.instructables.com/FEO/AZT2/HW4OKMQJ/FEOAZT2HW4OKMQJ.jpg&filename=fox09.jpg)
Go ahead and fold the head down.
10
![fox10.jpg](/proxy/?url=https://content.instructables.com/F0B/1Y4R/HW4OKMQT/F0B1Y4RHW4OKMQT.jpg&filename=fox10.jpg)
Fold a portion of the tail in.
Finished
![fox11.jpg](/proxy/?url=https://content.instructables.com/FWS/L9MB/HW4OKMS0/FWSL9MBHW4OKMS0.jpg&filename=fox11.jpg)
Draw the face and your all done.