Cute Robot Planter on a Swing | Made With TInkercad

This is a Cute Robot

Head is the main and the biggest part of the robot. It has large eyes and a small smile that makes him look cute to make the head folloe the steps below

1) At first take a rectangle box from the basic shape menu

2) Then we have to make his ears which can be made from a tube shape

Note: you can also make the ears with cylinder and a hole cylinder as shown in the picture

3) Now you have to place ears on both side of box, Note the ears are aligned and see them from all the direction that they are perfectly placed

Face Expressions are the main thing that make our robot look like devil, villain or cute. We are making a cute robot So, we will use big eyes and small smile.

To make the robot's eyes and mouth follow the steps below

1) Cut a tube into half to make a smile and then make it a hole and place where you want smile

2) To make eyes take two cylinder and place them where the eyes should be

3) They should be slightly inside the head to make a hole, And you will done with a cute hea

We have to make the robot to sit on a swing so we will make his abdomen connect with the swing

To make the abdomen follow the steps

1) Take a pyramid and make it flate from above with a help of hole box.

2) Place the pyramid on the tray made up of box

and you are done with the abdomen part

The robot is hanging on a swing so we will make his legs hanging. The legs will be slightly tilted at 4 degree

To make the legs follow the steps

1) Take rectangle box and tilt it at the angle of 4 degree and place it as shown in the picture

We have to make the hand curved not straight so follow the steps to make the hands

1) First take a tube and cut a small part as shown in the picture with the help of two hole boxes

2) The hand should be bigger from one part and small from one part so, place two boxes at angle of 4 and -4 degree respectively and place them above the curve hands

Now we have to make the wrist. The wrist will have a hole in center that will hold the thread from which the robot will hand. You can make the wrist with boxes as shown in the picture

Now we have to make the wrist. The wrist will have a hole in center that will hold the thread from which the robot will hand. You can make the wrist with boxes as shown in the picture

Now place it next to the hand that we have made in the last step

Now you have created the body fo the robot and this is the time to make a place where you can pot a plant

So we will make the space on the robot's head for that you have to take a hole box and place it above the head now join them to make a place to pot plants

And now you are done with a Cute Robot. To install it tie thread on all four edges of the swing plate and pass them all through the holes the hands and tie them somewhere