Customize Your Lip Gloss

by JosiesWorld in Craft > Jewelry

1255 Views, 8 Favorites, 0 Comments

Customize Your Lip Gloss

SAM_1544.JPG
an easy way to personalize your lip gloss :D

You Will Need:

SAM_1535.JPG
-a bead or pendant
-a tube of lip gloss
-a short chain
-a clasp
-two jump loops
-a thick pin 
-pliers(or some thing else to make the hole bigger with with)

Making the Chain:

SAM_1536.JPG
SAM_1539.JPG
Firstly you will need to add  the bead or pendant i have used a bear pendant. You can do this by using a jump loop.Open the jump loop by twisting it with your pliers. Then inset the chain and pendant/bead. Close the jump loop by twisting it with your pliers again. To add the clasp you must repeat this at the other end of the chain.

Making the Hole in the Lip Gloss:

SAM_1540.JPG
SAM_1541.JPG
SAM_1542.JPG
At first use a pin to make a small hole in the end of the lip gloss tube. Then use the pliers to make the hole bigger been careful not to tear the edge.This is were to attach the clasp.

Finished

SAM_1544.JPG
Attach the clasp to the end of the lip gloss and you are finished :D