Custom Monitor
Hi Geeks, Today I am here with my custom monitor build. I salvaged the LCD from an old laptop and added a display driver board. Mounted everything on aluminium frame. I used revits on joints.
The Screen
Screen was salvaged from an old laptop. And I added a LCD driver board to operate the LCD screen.
The Frame
I used Aluminium for frame and ACP sheet for electronics. Following shapes of aluminium strips are used.
1. 1/2" Square Pipe
2. L strip
3. T strip
4. straight strip
I also used 4 10mm Acrylic pieces as screen holder. I cut 5mm slotes on them.
1. 1/2" Square Pipe
2. L strip
3. T strip
4. straight strip
I also used 4 10mm Acrylic pieces as screen holder. I cut 5mm slotes on them.
Conclusion
Result is pretty awesome and useble.