Custom Hall Tree Landing Zone

My daughter-in-law needed a place for all the things the grandkids bring into the house after school. She needed some kind of landing zone for backpacks, shoes, school supplies and more!

This is what we came up with. Since she is in an apartment and plans to move in the future, we built it with that in mind. It can easily be taken apart and moved to a new location. 

Materials/Tools:

• (2) 3/4in Sanded Plywood (Home Depot)
• (2) 1x3 8ft Select Pine (Home Depot)
• (3) 1x3 6ft Select Pine (Home Depot)
• (2) 1x2 8ft Select Pine (Home Depot)
• (4) Everbilt Satin Nickel Single Robe Hook (Home Depot)
• BEHR Elephant Skin Paint (Home Depot)
• Everbilt Heavy-Duty Anti-Skid Surface Pads (Home Depot)
• Kreg 24 in. Rip-Cut Aluminum Circular Saw Guide (Home Depot)
• Makita Sub-Compact Circular Saw (Tool Only) (Home Depot)
• Makita 18V X2 LXT Lithium-Ion (36V) Brushless Cordless 6-1/2 in. Plunge Circular Saw (Home Depot)
• Makita 39 in. Plunge Saw Guide Rail (Home Depot)
• Kreg Pocket-Hole Jig 720 (Home Depot)
• Rockler Clamp-It Clips, 4-Pack (Rockler)
• Rockler Quick-Release Pock-It Hole Clamp (Rockler)
• RYOBI ONE+ 18V 18-Gauge Cordless AirStrike Brad Nailer (Home Depot)
• Wood Glue (Home Depot)
• Simpson Strong-Tie Wafer-Head Wood Screw (Home Depot)
• (3) Storage Basket (Target)

For more projects from us, please join our newsletter!

The unit is composed of two back pieces and the bench. We started with building the bench first.

We are using the Kreg 24 in. Rip-Cut Aluminum Circular Saw Guide with our Makita circular saw to cut down the plywood for the bench pieces.

Once all the bench pieces were cut, we dry-fit the box to determine where we wanted the interior cubbies dividers.

We placed those supports 15 inches apart.

Download the cut list here.

We assembled the bench with pocket hole screws and wood glue. Almost all the pocket holes were made on the back or the bottom so they would be hidden.

We did add pocket holes to the interior top but filled them with wood putty, and once they were painted, they were not noticeable.

We cut the face frame boards and again used pocket hole construction. We centered it onto the bench opening then glued and brad nailed it into place.

We cut the plywood to the length we wanted which was six feet and then cut it exactly down the center vertically at 24 inches.

We also cut the five vertical boards to length and then dry-fit the pieces to check the fit and placement of those vertical boards.

The top edge and sides of the plywood will show in the finished build so we used some iron-on edge banding to finish the edges.

The vertical boards on the back of the hall tree are a design element, but the center one also functions to hide the seam between the two halves of the back.

In this image, you can see we are only gluing and brad nailing half of the board to the edge.

When put together, the other board will slip behind this one so the seam is hidden.

The two back pieces are kept in place with boards that are screwed into place but are easily removed so the piece can be disassembled for easy moving.

The latex paint we used was thinned with Floetrol so that it would go on thinly. We wanted the grain of the wood to show through.

We added these 'feet' to keep the base from sliding and marking the floor.

After everything was painted and we were getting ready to add the hooks, we decided to add a decorative element with these pieces of wood set between the vertical boards. This is where we added the coat hooks.

As a final touch, we decided to make an upholstered cushion for the top. This is a piece of foam that we are reusing and cutting to size. I'm using an electric carving knife while Steph is directing the tip from the front. This is a very quick and efficient way to cut foam. It is upholstered in some heavy fabric left over from another project.

The cover was machine-sewn, but after the foam was inserted the opening needed to be hand-stitched.

Once the unit was finished and dry it was time to transport it to its new home.

It breaks into five pieces: the two back pieces, the bench, and two back support pieces. It fits easily into a Honda CRV for transport.

Once in its new home the backs were screwed into place, the supports were added to the back and the entire unit was put into place. Adding the cushion was the finishing touch.

The piece fits exactly in the space for which it was designed.

For more details, please visit our website!