Cube in Fusion 360
by guilherme_deoliveira in Craft > Digital Graphics
571 Views, 0 Favorites, 0 Comments
Cube in Fusion 360

Start creating a project on Fusion 360, then, press Create and select Cube. Select the side and start placing your Cube.
Supplies
- Fusion 360 installed.
Transforming the Cube

With the cube already in the work area, change the sides by 30mm to 30mm to make it symmetrical.
Press Pull the Cube

With the measures of the cube, we need to change the height of the Cube to be symmetrical. To be symmetrical, we need to press pull the cube, press pull is on the tools menu. By selecting Press pull, select the height of 30mm.
Round It

By pressing fillet, select all the sides and then push the arrow down to round it up
Round It (Reference)

Use this image for reference when doing the fillet.
Start Placing the Holes

By pressing the holes, select one side each time to place the holes, the holes need to have 7mm in depth.
Reference Image






Use these images to place the holes in the exact spot.