Crown and Wall Knot - Hide the Ends

by asemery in Outside > Knots

3110 Views, 3 Favorites, 0 Comments

Crown and Wall Knot - Hide the Ends

hiding the ends 2 021.JPG

Here is another way I hide the cord ends.

hiding the ends 2 005.JPG

Start with a crown knot. Bring each strand in a counter-clockwise direction, passing over its neighboring strand.

hiding the ends 2 006.JPG

Tie a wall knot beneath it. Take one strand brimg it underneath its neighbor and back out of the way

hiding the ends 2 007.JPG
hiding the ends 2 008.JPG
hiding the ends 2 009.JPG

Repeat with the other strands

hiding the ends 2 010.JPG

Snug the result

hidinf the ends 2 001.JPG
hiding the ends 2 001.JPG

Bring one strand over the top of the knot and under one crown knot strand as shown. Tighten.

hiding the ends 2 002.JPG

Repeat with other strands

hiding the ends 2 016.JPG
hiding the ends 2 015.JPG

With hemostat go through the center of the knot into any of the four openings, grab the appropriate cord and pull it through

hiding the ends 2 017.JPG
hiding the ends 2 018.JPG
hiding the ends 2 019.JPG
hiding the ends 2 020.JPG

Repeat with the remaining strands