Creating Remote Controlled DC MOTOR and Bulb With IR Remote
by Mirza Ali Akbar in Circuits > Arduino
401 Views, 2 Favorites, 0 Comments
Creating Remote Controlled DC MOTOR and Bulb With IR Remote
This is a remote control DC motor and bulb with an IR remote that I made in TinkerCad using Arduino.
When the bulb is on, then the DC motor doesn't work, and when the bulb is turned off, then the DC motor works.
It works perfectly and you can also make it.
With the help of this project, you can also make a remote-controlled fan and other things.
Link to this project in Tinkercad.
https://www.tinkercad.com/things/d0siJSKovJ3
Supplies
The supplies are in the file below.
Downloads
Connect all the wires as shown in the picture above.
Add code to the circuit.
The code is available to download.
Hooray You Have Created a Remote Controlled DC MOTOR and Bulb
