Create an IPod Touch/iPhone Stand From LEGOs! (Vertical and Horizontal)

Here's a way to make a simple and good looking stand for your iPod Touch or iPhone out of Legos!

Please note that you'll need Lego Technic pieces to create this stand. Also, this stand cannot charge or sync.

Here are all the pieces that you need!

Take the two 1x8 blocks and put them parallel to each other. Then, take the two long axles and put them through the first and third holes of the blocks.

Attach the gray pieces to the end of the axles.

Put the black connectors on the yellow pieces, as shown.

Connect the yellow pieces to the black pieces. The two black connectors should fill up the last two holes on the block.

-Side View
x-x-o-o-y-o-y

x=black connector
y=axle
o=empty

Take the remaining axle and insert it through the yellow pieces, as shown.

Put the remaining pieces on the front, as shown.

You've completed your new stand!
Try it out in both vertical and horizontal mode!