Create a Glass Out of a Wine Bottle and How to Engrave Jeep Logo.

• Glass Bottle
  
• Dust Mask
• Safety Googles
• Masking Tape
• Sandpaper (150)
• Dremel Diamond Point (7144)
• Dremel Power Tool
• G2 Bottle Cutter (to mark the bottle)

Using the G2 Bottle Cutter, mark the bottle in the position where you want to cut it. Just apply a little pressure to the bottle against the Cutter. From this step forward, it's recommended to use the Safety Googles!!!

[Option A]

Alternate Hot and Cold water. Try to just splash with water the cutting line!

[Option B]

Using the Dremel Thin Disk, cut thru the line. Be patient, just apply light pressure!... From this step forward is recommended to use the Dust Mask!!!

Using a 150 sandpaper, rub off the glass border to even the surface and continue until it is smooth to the touch!

Cover with masking tape the area of the glass where you will be engraving the art

Click the thumbnail above or HERE to view in detail the final 4 steps In the DIY video! If you liked this tutorial, please press FAVORITED in Instructables and LIKE on the YouTube Video... Thanks for the support!...