Crabber's Eye Knot
![crabber's eye 001.JPG](/proxy/?url=https://content.instructables.com/FNB/BSQW/K3IT4JVV/FNBBSQWK3IT4JVV.jpg&filename=crabber's eye 001.JPG)
![crabber's eye 002.JPG](/proxy/?url=https://content.instructables.com/F7F/MPQO/K3IT4JW1/F7FMPQOK3IT4JW1.jpg&filename=crabber's eye 002.JPG)
I found this knot in an old "Handbook of knots for seamen". It is another slide and lock loop knot.
Males a nice lanyard or zipper pull.
![crabber's eye 003.JPG](/proxy/?url=https://content.instructables.com/FID/S4EX/K3IT4JW3/FIDS4EXK3IT4JW3.jpg&filename=crabber's eye 003.JPG)
Bring working end (WE) over to the right forming a loop.
![crabber's eye 004.JPG](/proxy/?url=https://content.instructables.com/F2I/TWFY/K3IT4JWV/F2ITWFYK3IT4JWV.jpg&filename=crabber's eye 004.JPG)
Bring WE to the left going under (forming a small bight).
![crabber's eye 005.JPG](/proxy/?url=https://content.instructables.com/FNE/0ISY/K3IT4JX0/FNE0ISYK3IT4JX0.jpg&filename=crabber's eye 005.JPG)
Bring WE end up.
![crabber's eye 006.JPG](/proxy/?url=https://content.instructables.com/FJK/USCR/K3IT4JX6/FJKUSCRK3IT4JX6.jpg&filename=crabber's eye 006.JPG)
and to the right going under.
![crabber's eye 007.JPG](/proxy/?url=https://content.instructables.com/FBF/FDIM/K3IT4JX9/FBFFDIMK3IT4JX9.jpg&filename=crabber's eye 007.JPG)
Bring WE down through the bight formed in step 2.
![AB.jpg](/proxy/?url=https://content.instructables.com/FQR/E9FU/K3IT4JXF/FQRE9FUK3IT4JXF.jpg&filename=AB.jpg)
Adjust loop size by pulling on A or a.
![AB.jpg](/proxy/?url=https://content.instructables.com/F6O/X0MA/K3IT4KGD/F6OX0MAK3IT4KGD.jpg&filename=AB.jpg)
![crabber's eye 008.JPG](/proxy/?url=https://content.instructables.com/FWD/BWRW/K3IT4JXA/FWDBWRWK3IT4JXA.jpg&filename=crabber's eye 008.JPG)
![crabber's eye 009.JPG](/proxy/?url=https://content.instructables.com/FZB/C2QO/K3IT4JXB/FZBC2QOK3IT4JXB.jpg&filename=crabber's eye 009.JPG)
Pull on B and b to lock loop in place. Tighten.