Cornerstone Project
Description of the project
Introduction
In our project, we are making a shelter house for victims of abuse. The shelter house will help people that are being abused and need a place to stay a place, a place to spend the night. We chose to build a shelter house for victims of abuse because many people in the world are abused and some of them want to leave the house they live at since they're being abused.
Materials and Tools Selection
Coding
Step by Step Instructions
Step 1: Dig 5 holes.
Step 2: Add 4 locks
Step 3: Grab a level tool and make sure the blocks are leveled. Make sure the measurements are accurate of how far the blocks are and that they're in the right position.
Step 4: Grab 2 by 4 pieces of wood and chop saw them if needed.
Step 5: Drive holes and drill screws into the wood to create the base
Step 6: Place the base/wood into the blocks
Project Conclusion and Plan for the Next 2 Weeks
Overall, our project was good we succeed in gathering research in abuse and how living in a life shelter is. Also, we succeeded in making a website. However, we struggled in getting the blocks leveled eventually we were able to by leveling it out by using sand. We also struggled with getting materials because we needed a wire in order to power our solar panel, therefore, our solar panel wouldn't work since we didn't have materials. We would change our design by making the size of the shelter wider so that if someone is being abused along with their children, the victim could take their children with them.
The next two weeks we will get more wood and cut it and put up the wall in the sides. Also, we will add epoxy to the wood to make it waterproof so that the wood doesn't get ruined by the rain. We'll add the front door and add hinges in order for the door to open and close.