Cool Paper Airplane Has Retractable Landing Gear

Learn how to do it in 32 easy and clear steps if you don’t understand how to do I’m linking a video at the end to show you how to do it. you will need 1 a4 piece of paper :D

get a a4 piece of paper and fold it in half

open up your paper

get the top right hand corner and fold it into this shape

open it up

Grab the top left hand corner and fold it down

open it up

fold down so that all lines over lap

open it up

fold it down again

get the top right hand corner and push it in to make it look like the image above

do the same to the left

get the flap and fold it up to the top corners

do the same with the other side

get the top and fold it down

do the same with the other side

fold the top corner to look like a cone

do the same with the other side

open it up

do the same fold but upside down tis time

do the small with the other side

open it up

get the little notch now which you have made and fold to look like the image above

do the same with the other side

flip around

fold down the point until you can't. if you have done the tutorial correctly so fare you will have to stop a bout 3 centimetres to 2 centimetres down

fold in half towards you

fold your wings however you like this will not affect the landing gear

do the same with the other side

it is your choice whether to fold up the wings pr not I fond that this specific type of plane flies best with the folded up wing

do the same for the other side

flip so that the bottom is pointing at you

get the little triangle that is nearest to the outside of the nose as indicated above

fold it to look like it is a stick pointing out of your nose

do the same with the other side

now fold them again using the bird head fold this gives it the wheel affect

do the same to the other side

finished product press the image to see the full pic :D hope you like the tutorial please support by following. more tutorials in the future

note: if you want to retract the landing gear do the opposite of step 33 and 34