Cool Badminton Shuttle -- Shuttlecock
by Louis sMarty in Workshop > 3D Printing
412 Views, 0 Favorites, 0 Comments
Cool Badminton Shuttle -- Shuttlecock
Have you ever searched a Shuttle or wanted one? This is the sign, that you need one... It works well :)
School: Liechtensteinisches Gymnasium, Europe
Supplies
Some random Tape, (TPU filament for the top), PLA for the rest
Place the Objects in your Printer software and put them on your disk. TIPP: Use Tree supports
Print the Files. It should take about 8,30 hours.
When you have some TPU, use it for the head of the Shuttle.
Printing Temp: PLA: 200°C, 50°C; Max infill 10%
Clean It Up
Remove the Supports carefully, that you don't damage the product. It's best to use a file and pliers.
Complete the Shuttle
Put the Components together add some glue and glue it together (if they don't fit you have to file, that it fit's with a little bit of pressure). Last but not least add some Tape if you want.
Well Done! Now your Shuttle is ready for your first match ;) Have fun with it!!!
It would be friendly to leave a like and give a I did it ;)