Converting a Cheap Acoustic Guitar to a Cheap Resonator Guitar
93396 Views, 181 Favorites, 0 Comments
Converting a Cheap Acoustic Guitar to a Cheap Resonator Guitar
![IMG-20120416-00232.jpg](/proxy/?url=https://content.instructables.com/F59/A2UL/H1JUH5CS/F59A2ULH1JUH5CS.jpg&filename=IMG-20120416-00232.jpg)
![jayjayjr.jpg](/proxy/?url=https://content.instructables.com/FJ6/ZPSS/H1JUH5FG/FJ6ZPSSH1JUH5FG.jpg&filename=jayjayjr.jpg)
So I bought a cheap acoustic guitar ($15) from Goodwill and thought it would be interesting project to turn it into a cheap resonator guitar. After checking online and seeing what others had done, I did pretty much the same with a few adjustments to the process. The process was a bit sloppy, but in the end it came out alright!
The first picture is the finished resonator, the second is what I started with (I forgot to take a picture of the ACTUAL guitar I used before cutting it up!). The soundhole covers are drainhole covers, the coverplate is made out of an old metal dish tray, and the bridge covers are two drawer handles. I wimped out on fashioning my own resonator cone/biscuit bridge and tailpiece, and just bought them cheaply online. I also bought a cheap piezo pickup so that the resonator could be amplified.
This is by no means an all inclusive guide to the process I took, more of a rough idea. I kinda just ran with the concept and paid scant attention to precise details...
The first picture is the finished resonator, the second is what I started with (I forgot to take a picture of the ACTUAL guitar I used before cutting it up!). The soundhole covers are drainhole covers, the coverplate is made out of an old metal dish tray, and the bridge covers are two drawer handles. I wimped out on fashioning my own resonator cone/biscuit bridge and tailpiece, and just bought them cheaply online. I also bought a cheap piezo pickup so that the resonator could be amplified.
This is by no means an all inclusive guide to the process I took, more of a rough idea. I kinda just ran with the concept and paid scant attention to precise details...
Cutting a Hole in Soundboard, Making the Soundwell
![Alexandria-20120305-00097.jpg](/proxy/?url=https://content.instructables.com/FQJ/16XM/H1JUH5D0/FQJ16XMH1JUH5D0.jpg&filename=Alexandria-20120305-00097.jpg)
![Alexandria-20120306-00098.jpg](/proxy/?url=https://content.instructables.com/FVS/PRKX/H1PISX45/FVSPRKXH1PISX45.jpg&filename=Alexandria-20120306-00098.jpg)
![Alexandria-20120306-00099.jpg](/proxy/?url=https://content.instructables.com/FGD/LSHP/H1LWPRS4/FGDLSHPH1LWPRS4.jpg&filename=Alexandria-20120306-00099.jpg)
![Alexandria-20120306-00100.jpg](/proxy/?url=https://content.instructables.com/FKU/D06R/H1PISX49/FKUD06RH1PISX49.jpg&filename=Alexandria-20120306-00100.jpg)
![Alexandria-20120306-00101.jpg](/proxy/?url=https://content.instructables.com/FOQ/5UKR/H1LWPRS5/FOQ5UKRH1LWPRS5.jpg&filename=Alexandria-20120306-00101.jpg)
![Alexandria-20120306-00103.jpg](/proxy/?url=https://content.instructables.com/FP6/CEPB/H1JUIVE5/FP6CEPBH1JUIVE5.jpg&filename=Alexandria-20120306-00103.jpg)
![Alexandria-20120306-00105.jpg](/proxy/?url=https://content.instructables.com/FE7/B6UC/H1KHA9T0/FE7B6UCH1KHA9T0.jpg&filename=Alexandria-20120306-00105.jpg)
The first step was to cut a hole in the soundboard so that the soundwell could be inserted. The soundwell is a wooden bowl, about 3/4" thick, that I bought from Target. I wasn't particularly exacting in this process, but I cut the bowl so that it would fit snugly in the newly made hole. Rather than removing the back of the guitar in order to fit the soundwell, I cut it in half so I could jimmy it in there.
I cut a few arches in the bottom of the "soundwell" so that some noise could escape into the rest of the guitar body. After fitting it in, I applied a heavy dose of wood glue to hold it in place
I cut a few arches in the bottom of the "soundwell" so that some noise could escape into the rest of the guitar body. After fitting it in, I applied a heavy dose of wood glue to hold it in place
Wood Puttying and Sanding Smooth
![IMG-20120307-00107.jpg](/proxy/?url=https://content.instructables.com/F18/IZFQ/H1PISX4T/F18IZFQH1PISX4T.jpg&filename=IMG-20120307-00107.jpg)
![IMG-20120307-00108.jpg](/proxy/?url=https://content.instructables.com/FRP/H1T2/H1PISX4U/FRPH1T2H1PISX4U.jpg&filename=IMG-20120307-00108.jpg)
![IMG-20120307-00109.jpg](/proxy/?url=https://content.instructables.com/FVM/LVV9/H1KHA9T7/FVMLVV9H1KHA9T7.jpg&filename=IMG-20120307-00109.jpg)
![IMG-20120307-00110.jpg](/proxy/?url=https://content.instructables.com/FJO/XSMJ/H1JUIVF2/FJOXSMJH1JUIVF2.jpg&filename=IMG-20120307-00110.jpg)
![IMG-20120310-00121.jpg](/proxy/?url=https://content.instructables.com/FBS/3KZ3/H1JUIVF4/FBS3KZ3H1JUIVF4.jpg&filename=IMG-20120310-00121.jpg)
![IMG-20120311-00125.jpg](/proxy/?url=https://content.instructables.com/FOL/TF4V/H1KHA9T6/FOLTF4VH1KHA9T6.jpg&filename=IMG-20120311-00125.jpg)
![IMG-20120311-00124.jpg](/proxy/?url=https://content.instructables.com/FXH/GJSA/H1LWPRT9/FXHGJSAH1LWPRT9.jpg&filename=IMG-20120311-00124.jpg)
![IMG-20120307-00112.jpg](/proxy/?url=https://content.instructables.com/FQL/6XOL/H1PISX52/FQL6XOLH1PISX52.jpg&filename=IMG-20120307-00112.jpg)
After the glue for the soundwell had sufficiently dried, I sanded off the tacky blue paint so that the guitar would be smooth and ready for a new stain down the line. I also applied a heavy dose of wood putty to cover the seams between the two pieces of the soundwell, and the gaps between the soundwell and the guitar body. For the sanding I used various grits of sandpaper and a trusty wood rasp.
Additionally, at this point I cut a new design in the headstock since I didn't like the original shape.
Additionally, at this point I cut a new design in the headstock since I didn't like the original shape.
A New Cover for the Old Soundhole, Test Placement of Pieces
![IMG-20120311-00123.jpg](/proxy/?url=https://content.instructables.com/F7P/JDQE/H1PISX58/F7PJDQEH1PISX58.jpg&filename=IMG-20120311-00123.jpg)
![IMG-20120307-00113.jpg](/proxy/?url=https://content.instructables.com/FQZ/QHBJ/H1LWPRTT/FQZQHBJH1LWPRTT.jpg&filename=IMG-20120307-00113.jpg)
![IMG-20120319-00130.jpg](/proxy/?url=https://content.instructables.com/FEA/GSLD/H1PISX5A/FEAGSLDH1PISX5A.jpg&filename=IMG-20120319-00130.jpg)
![IMG-20120325-00133.jpg](/proxy/?url=https://content.instructables.com/F22/84N8/H1JUIX1G/F2284N8H1JUIX1G.jpg&filename=IMG-20120325-00133.jpg)
I cut a new piece to cover the old soundhole. The shape of the piece was only a temporary design, and as the project progressed I adjusted it to account for the placement of the cover plate. The wood I used ended up being too thick, so I had to sand it down later.
In order to make sure this wasn't a complete waste of time, I put the resonator cone in and strung it up for a test play. It sounded good, but it was necessary to adjust the string height.
In order to make sure this wasn't a complete waste of time, I put the resonator cone in and strung it up for a test play. It sounded good, but it was necessary to adjust the string height.
Cutting New Soundholes and Coverplate
![Henrietta-20120331-00144.jpg](/proxy/?url=https://content.instructables.com/FXM/V12I/H1JUIX1Q/FXMV12IH1JUIX1Q.jpg&filename=Henrietta-20120331-00144.jpg)
![Henrietta-20120331-00143.jpg](/proxy/?url=https://content.instructables.com/FI1/QVEM/H1JUIX3C/FI1QVEMH1JUIX3C.jpg&filename=Henrietta-20120331-00143.jpg)
![Henrietta-20120331-00146.jpg](/proxy/?url=https://content.instructables.com/FJ8/R3PV/H1JUIX2H/FJ8R3PVH1JUIX2H.jpg&filename=Henrietta-20120331-00146.jpg)
![Henrietta-20120331-00147.jpg](/proxy/?url=https://content.instructables.com/FU8/ZBXK/H1JUH5DM/FU8ZBXKH1JUH5DM.jpg&filename=Henrietta-20120331-00147.jpg)
![Henrietta-20120331-00148.jpg](/proxy/?url=https://content.instructables.com/F8X/7EV6/H1KHA9TM/F8X7EV6H1KHA9TM.jpg&filename=Henrietta-20120331-00148.jpg)
![Henrietta-20120331-00150.jpg](/proxy/?url=https://content.instructables.com/F9P/9TKY/H1JU59YO/F9P9TKYH1JU59YO.jpg&filename=Henrietta-20120331-00150.jpg)
![cutting biscuit hole coverplate 2.JPG](/proxy/?url=https://content.instructables.com/FUF/8O33/H1JU59ZH/FUF8O33H1JU59ZH.jpg&filename=cutting biscuit hole coverplate 2.JPG)
![drilled holes coverplate.JPG](/proxy/?url=https://content.instructables.com/FV4/SJ29/H1JUIX4S/FV4SJ29H1JUIX4S.jpg&filename=drilled holes coverplate.JPG)
I used a dremel to cut the new soundholes on either side of the base of the neck, having already determined the hole size with the test placement of the drainhole covers.
I used an old metal dish tray (another Goodwill purchase for $2) to cut the new coverplate. In order to get the correct size, I used a piece of cardboard to cut a circle until it covered the hole in the soundboard appropriately, and then traced the circle onto the dish tray. To cut the dish tray, I used cutoff wheels on the dremel tool, and then sanded smooth the cut so that there were no burrs.
I also cut a rectangular hole in the coverplate to account for the bridge. Using a drill, I cut several holes of different sizes in the coverplate.
I used an old metal dish tray (another Goodwill purchase for $2) to cut the new coverplate. In order to get the correct size, I used a piece of cardboard to cut a circle until it covered the hole in the soundboard appropriately, and then traced the circle onto the dish tray. To cut the dish tray, I used cutoff wheels on the dremel tool, and then sanded smooth the cut so that there were no burrs.
I also cut a rectangular hole in the coverplate to account for the bridge. Using a drill, I cut several holes of different sizes in the coverplate.
Installing Pickup and Staining
![IMG-20120407-00170.jpg](/proxy/?url=https://content.instructables.com/FOG/9370/H1LWPRUJ/FOG9370H1LWPRUJ.jpg&filename=IMG-20120407-00170.jpg)
![IMG-20120408-00178.jpg](/proxy/?url=https://content.instructables.com/FUQ/L86H/H1PISX5R/FUQL86HH1PISX5R.jpg&filename=IMG-20120408-00178.jpg)
![IMG-20120408-00179.jpg](/proxy/?url=https://content.instructables.com/FYM/0CS5/H1LWPRUL/FYM0CS5H1LWPRUL.jpg&filename=IMG-20120408-00179.jpg)
![IMG-20120408-00184.jpg](/proxy/?url=https://content.instructables.com/FYR/2FU2/H1JUH5EG/FYR2FU2H1JUH5EG.jpg&filename=IMG-20120408-00184.jpg)
![IMG-20120409-00201.jpg](/proxy/?url=https://content.instructables.com/F3S/VXFF/H1KHA9VM/F3SVXFFH1KHA9VM.jpg&filename=IMG-20120409-00201.jpg)
![IMG-20120409-00199.jpg](/proxy/?url=https://content.instructables.com/F6N/WZPO/H1JUH5EI/F6NWZPOH1JUH5EI.jpg&filename=IMG-20120409-00199.jpg)
![IMG-20120410-00211.jpg](/proxy/?url=https://content.instructables.com/FOO/C7DQ/H1KHA9VN/FOOC7DQH1KHA9VN.jpg&filename=IMG-20120410-00211.jpg)
The piezo pickup I bought cost around $15, and it was pretty easy to install. In hindsight, I should have accounted for the pickup before gluing in the soundwell...it took some maneuvering but I was able to get the pickup input under the soundwell and into the hole I drilled in the side using a piece of dental floss attached the input.
For the stain, I wanted to get a dirty look, so I used a few coats of different color stains. After finishing the staining and applying a coat of polyurethane, I superglued the pickup to the underside of the resonator cone. It ended up dampening the tone quite a bit, but it was nice to be able to plug it into an amp.
For the stain, I wanted to get a dirty look, so I used a few coats of different color stains. After finishing the staining and applying a coat of polyurethane, I superglued the pickup to the underside of the resonator cone. It ended up dampening the tone quite a bit, but it was nice to be able to plug it into an amp.
Applying Soundhole Covers and Coverplate
![creation of block hold drain.JPG](/proxy/?url=https://content.instructables.com/FEP/GJ8H/H1JUH5F4/FEPGJ8HH1JUH5F4.jpg&filename=creation of block hold drain.JPG)
![tape pre black spray.JPG](/proxy/?url=https://content.instructables.com/FPO/P3CX/H1JUIX9U/FPOP3CXH1JUIX9U.jpg&filename=tape pre black spray.JPG)
![post black spray.JPG](/proxy/?url=https://content.instructables.com/FGJ/7QVT/H1LWPRVB/FGJ7QVTH1LWPRVB.jpg&filename=post black spray.JPG)
![IMG-20120415-00227.jpg](/proxy/?url=https://content.instructables.com/FRO/AR2B/H1JUH5FA/FROAR2BH1JUH5FA.jpg&filename=IMG-20120415-00227.jpg)
![Mount Vernon-20120415-00224.jpg](/proxy/?url=https://content.instructables.com/FP6/4V5W/H1JUH5F9/FP64V5WH1JUH5F9.jpg&filename=Mount Vernon-20120415-00224.jpg)
![IMG-20120415-00228.jpg](/proxy/?url=https://content.instructables.com/F8R/4YJ4/H1JU5A48/F8R4YJ4H1JU5A48.jpg&filename=IMG-20120415-00228.jpg)
![IMG-20120415-00230.jpg](/proxy/?url=https://content.instructables.com/F8Q/QYMI/H1JUIXIX/F8QQYMIH1JUIXIX.jpg&filename=IMG-20120415-00230.jpg)
In order to secure the drainhole covers over the new soundholes, I glued two wooden blocks to the back of the guitar so that the drainhole covers cover be attached by a woodscrew to the blocks. I spray painted the inside black.
I attached the bridge covers (two drawer handles) after drilling holes to screw them onto the coverplate. I screwed the coverplate to the guitar body after drilling small holes around the circumference, and then I glued on the piece I made earlier to cover what was left of the old soundhole.
I attached the bridge covers (two drawer handles) after drilling holes to screw them onto the coverplate. I screwed the coverplate to the guitar body after drilling small holes around the circumference, and then I glued on the piece I made earlier to cover what was left of the old soundhole.
Finished!
![everything screwed in.JPG](/proxy/?url=https://content.instructables.com/FW1/KDLF/H1LWPRVK/FW1KDLFH1LWPRVK.jpg&filename=everything screwed in.JPG)
![final view 5 close up.JPG](/proxy/?url=https://content.instructables.com/FVO/4M50/H1KHA9WR/FVO4M50H1KHA9WR.jpg&filename=final view 5 close up.JPG)
![final view 1.JPG](/proxy/?url=https://content.instructables.com/FDX/B9QW/H1LWPRVL/FDXB9QWH1LWPRVL.jpg&filename=final view 1.JPG)
![final view 2.JPG](/proxy/?url=https://content.instructables.com/FBX/D92U/H1JUH5FC/FBXD92UH1JUH5FC.jpg&filename=final view 2.JPG)
![final view 3.JPG](/proxy/?url=https://content.instructables.com/F6P/CG3T/H1JUIXJK/F6PCG3TH1JUIXJK.jpg&filename=final view 3.JPG)
After everything dried, I reattached the tuning pegs and the tailpiece, and strung the guitar up. All in all in turned out quite nicely, though next time I would probably forgo the attachment of the pickup since it did affect the tone more than I would've liked. Also, I would pay more attention to details...the intonation for a few strings is off but unfortunately beyond repair at this point!
For a more abbreviated rundown of this process, check out a youtube video I made:
http://youtu.be/rHkmeAvKj0M
For a more abbreviated rundown of this process, check out a youtube video I made: