Convert Normal Canon Lens to Macro!

by alfonsoia87 in Circuits > Cameras

2638 Views, 11 Favorites, 0 Comments

Convert Normal Canon Lens to Macro!

IMG_0469.JPG
IMG_0471.JPG

Hello,

My name is Alfonso and today I want to show you how to make a DIY macro lens from a normal Canon Lens.

Here I use a 28-80mm EF-S lens but all lenses should work.

IN THIS INSTRUCTABLE YOU NEED TO BE VERY CAREFULL WITH THE LENS AND THE RETIRED SCREWS. YOU CAN MAKE THE LENS NORMAL IF YOU WANT TO AGAIN. IT ISN'T A PERMANENT WORK.

What You Need?

IMG_0627.JPG
IMG_0631.JPG

Its simple:

You need only a screwdriver and a Canon Lens.

Unscrew the Screws From the Lens

IMG_0637.JPG
IMG_0632.JPG
IMG_0633.JPG

First you will need to unscrew the screws from the left and right side from the front side of your lens.

YOU NEED TO BE REALLY CAREFUL BECAUSE THESE SCREWS ARE REALLY LITTLE.

Retire the Front Lens

IMG_0636.JPG

When you end with the screws you will put the front of the lens upside down and the front lens will came to your hands. Then the only thing you need to do is to put the lens in the camera and voila! You made your super macro DIY LENSES!!!

Example Photos

IMG_0468.JPG
IMG_0470.JPG
IMG_0474.JPG

This photos of one IC and the screw we unscrew were taken with DIY super macro lens.

THANKS!

Thanks for reading my first Instructable. I hope you made it well and enjoy it! Be very carefull.

If you liked my instructable please vote for it!!! God bless you!

Alfonso Iannuzzelli