Connecting ESP8266 With Raspberry PI Using Python

Connecting the ESP8266 Wi-Fi module to Raspberry Pi.The ESP8266 is a low-cost Wi-Fi chip with full TCP/IP stack and microcontroller capability produced by Shanghai-based Chinese manufacturer, Espressif Systems. The chip first came to the attention of western makers in August 2014 with the ESP-01 module, made by a third-party manufacturer, AI-Thinker. This small module allows microcontrollers to connect to a Wi-Fi network and make simple TCP/IP connections using Hayes-style commands. However, at the time there was almost no English-language documentation on the chip and the commands it accepted.The very low price and the fact that there were very few external components on the module which suggests that it could eventually be very inexpensive in volume, attracted many hackers to explore the module, chip, and the software on it, as well as to translate the Chinese documentation.

The ESP8285 is an ESP8266 with 1 MB of built-in flash, allowing for single-chip devices capable of connecting to Wi-Fi. Source : WikiPedia (http://bit.ly/2cORmj0)

—————————————————————————————————

Links : Sparkfun AT Guide : http://bit.ly/2cEzSbv

Schematic : http://bit.ly/2cEzSbv

Py App : http://bit.ly/2cEzSbv

Buy ESP8266 : http://bit.ly/2cEzSbv

Getting started with ESP8266 | AT Commands : http://bit.ly/2cEzSbv ********************************************************************

Subscribe YouTube : http://bit.ly/2cEzSbv

Guys Subscribe to my channel for latest contents into your inbox. Support me to keep going. ___________________________________________

Website : http://bit.ly/2cEzSbv

Twitter : http://bit.ly/2cEzSbv

YouTube : http://bit.ly/2cEzSbv

Instagram : http://bit.ly/2cEzSbv

GIT : http://bit.ly/2cEzSbv