Magnum Condom LED Music Light
by fishin4daze in Circuits > Electronics
35115 Views, 52 Favorites, 0 Comments
Magnum Condom LED Music Light
Sound Activated Condom Lights. Must see the video ending :)
Supplies Used,
2 Blue 5mm LED's 3.7 volt 2600mcd
2 5mm LED Holders
2 Condoms
Heat shrink wrap
Some thin gague wire. I used an old phone cord.
Clear Silicone
2 tops off a Gaterade bottle
Multimeter
Electrical Tape
Wire strippers
2 5mm LED Holders
2 Condoms
Heat shrink wrap
Some thin gague wire. I used an old phone cord.
Clear Silicone
2 tops off a Gaterade bottle
Multimeter
Electrical Tape
Wire strippers
Putting It Together
Install the LED's into the holders, and attach the holders to the bottle tops.
(Note, the longer leg on the LED is positive, so hook your wires up accordingly.)
Add some thin wire to the LED's(I use an old phone cord), and attach the wires to your speaker wires. This will only work on amplified speakers, or speakers that plug into the wall.
(Note, the longer leg on the LED is positive, so hook your wires up accordingly.)
Add some thin wire to the LED's(I use an old phone cord), and attach the wires to your speaker wires. This will only work on amplified speakers, or speakers that plug into the wall.