Concrete Fire Bowl

My mom has been wanting a tabletop fire pit so I decided to take on this challenge and make one myself. Making the concrete bowl was easier than expected. Adding a little tiki fuel to the Sterno can created the yellow flame.

1. Concrete ( Quick-rete )
2. Bowls (12” and 10”)
3. Cooking spray
4. Weight (like rocks)
5. Fire glass, or lava rock
6. Sterno can (with a little tiki fuel added)
7. Chicken wire
8. Crushed glass not fire glass (optional)
9. Epoxy (optional)

In a large 5 gallon bucket empty enough concrete for the amount of bowls you will be making. 1/4 bag for each 12” bowl you make. Than mix the concrete.

Spray the inside of the large bowl, and the outside of the small bowl.

Put the concrete in the large bowl, then push the small one into the concrete. And put your weights in the small bowl. If the small bowl starts to crack don’t worry the pressure will hold it where it needs to be.

Tap the side of the big bowl, to remove all the bubbles.

Allow the concrete bowl to dry for at least 48 hours before removing it from plastic bowls.

Sand the rim of your bowl so it is smooth.

Use epoxy to glue the crushed glass on the rim of the bowl. I got mine at Dollar Tree.

Get your Sterno can with tiki oil and put the wire over it, then fill the bowl up the rest of the way with the rock or fire glass. Then next you can light it, it will be a blue flame for a while but the orange flame will appear.