Table

by MERCHAT Rémi in Workshop > Molds & Casting

1396 Views, 12 Favorites, 0 Comments

Table

DSC_0810.jpg

I am so so pleased with how they turned out. Initially I had doubts about the yellow we chose, but once assembled, it goes well with the white. The colours we used were Taubmans Yellow Spark and Dulux White on White, both in semi-gloss.

Strangely, the most difficult thing to procure were the bolts. A major Australian hardware chain that is the place to go to for these kind of items only had bolts with the manufacturer’s logo on the dome. This simply would not do, so an extensive search commenced. Finally we found some logo-less bolts at an independent hardware store. They came in a brown paper bag, which made me happier than it probably should.