Computer Holder
![IMG_0921.JPG](/proxy/?url=https://content.instructables.com/FZI/I307/KHQ9VO4O/FZII307KHQ9VO4O.jpg&filename=IMG_0921.JPG)
![IMG_0922.JPG](/proxy/?url=https://content.instructables.com/FWK/0VSK/KHQ9VO4W/FWK0VSKKHQ9VO4W.jpg&filename=IMG_0922.JPG)
This is a my computer holder. This allows you to put a computer of your dimensions in and have it locked in place so it will not fall. It can also be attached and moved throughout places you go. I created this for one of my teachers at school. She constantly could not find a good place to put her computer while multi tasking. She wanted something portable while being easy to use. I tried my best to meet her needs! The biggest struggle was finding a connector that was going to help hold her computer and a beverage if wanted and able to have it moved.
Step 1: Base
![IMG_0918.JPG](/proxy/?url=https://content.instructables.com/FN5/PPQ7/KHQ9VNTZ/FN5PPQ7KHQ9VNTZ.jpg&filename=IMG_0918.JPG)
For the base I Used two rectangles and slimed them down to fit the dimensions of my computer. All computers vary in size so adjust based on the dimensions you are using. I made my base's a little larger than my computer so I had space to be able to add more.
Step 2: Grouping
![IMG_0919.JPG](/proxy/?url=https://content.instructables.com/FDV/Q8JZ/KHQ9VNU0/FDVQ8JZKHQ9VNU0.jpg&filename=IMG_0919.JPG)
This is where it would be good to know the dimensions you are working with. For me, I added the holder in which I will put my computer (dimensions of the computer I am working with). I also added a drink holder for fun.
Step 3: Holder
![IMG_0920.JPG](/proxy/?url=https://content.instructables.com/FBB/FYVZ/KHQ9VNUM/FBBFYVZKHQ9VNUM.jpg&filename=IMG_0920.JPG)
You may use any clip on accessories for this. I used these 4 and attached to the back for my final product. I found that this worked best for me and others I had interviewed.
Step 4: Final Product
![IMG_0921.JPG](/proxy/?url=https://content.instructables.com/FLR/ZKZT/KHQ9VNUW/FLRZKZTKHQ9VNUW.jpg&filename=IMG_0921.JPG)
![IMG_0922.JPG](/proxy/?url=https://content.instructables.com/FAI/WAJL/KHQ9VNV7/FAIWAJLKHQ9VNV7.jpg&filename=IMG_0922.JPG)
This is my final product. I added a last name as well as colors I enjoy. The clips back provide a stable holder in which you can attach and remove anywhere you may like. Thank you!