Colourful Hexagonal Pen Holder From Paper

by aliceniraimathi19 in Craft > Paper

44483 Views, 33 Favorites, 0 Comments

Colourful Hexagonal Pen Holder From Paper

IMG_1571.JPG
IMG_1569.JPG
IMG_1572.JPG

In this instructable we will see how to make a colourful Hexagonal Paper Box which you can keep on your desk top. This attractive box can be used to keep your pens, pencils and other stationary items

Cut Paper

IMG_1539.JPG
IMG_1540.JPG

  • Take six pieces of A4 or any size paper in six different colors
  • Cut a square shape to the maximum size you can get from the papers.
  • Keep the small pieces cut out from the papers which we will use to insert the folds

Fold Paper

IMG_1541.JPG
IMG_1542.JPG
IMG_1543.JPG
IMG_1544.JPG
IMG_1545.JPG
IMG_1546.JPG
IMG_1547.JPG

  • Take one square piece of paper and fold it diagonally on both sides and make crease
  • Then fold it in half on both sides and then in quartes
  • Open the folded paper and fold four corners to triangles as shown
  • Fold the triangle portions inside and then fold it in half.

Now your piece of paper will look like this in the last picture

Cut Insert

IMG_1548.JPG
IMG_1549.JPG
IMG_1550.JPG
IMG_1551.JPG

  • Remember we have kept the cut smaller pieces with all papers
  • Take one different colored one than the folded paper
  • Measure to one side of the rectangle as shown and cut paper
  • Insert the cut portion inside the triangled opening

Now our folded paper will look like one in the last picture

Insert One End to Other

IMG_1552.JPG
IMG_1553.JPG
IMG_1554.JPG
IMG_1555.JPG

  • We have four folds in quarters, that is you can see four sides, two at the back, one with inserted paper and one without paper in front
  • Insert the portion with the paper piece inside the triangle of opposite side
  • Press the portion inside to make a triangle shape

Make six pieces like this from all cut papers

Glue Them Together

IMG_1556.JPG
IMG_1557.JPG
IMG_1558.JPG
IMG_1559.JPG
IMG_1560.JPG
IMG_1561.JPG
IMG_1562.JPG

  • Take two of prepared pieces and apply glue on one surface at back
  • Attach another piece with the glued surface, so that the square inserts are visible on outside

Glue all pieces together one by one and you will have the completed piece as seen in last picture

Measure Bottom Piece

IMG_1563.JPG
IMG_1564.JPG
IMG_1566.JPG

  • Now we need to close one side so that we can use it for keeping pen and other items in it
  • Place the completed piece on a card stock and mark outline and cut the shape from card stock

Stick Bottom With Glue

IMG_1568.JPG
IMG_1567.JPG
IMG_1570.JPG
IMG_1572.JPG

  • Apply glue on bottom side edges and place the cut shape on top
  • Allow the glue to dry and we have our finished Pen Holder

Keep your pen and other stationary items in this attractive box on your desktop