Coke Bottle Fire Torch

Drill, drill bits, thick cotton string, lighter or matches, torch fuel, glass coke bottle with screw on lid

Plait the string so it is about 1.5foot long. Tie off the end.

Tie a heaving line in one end of the plait. This will be the lighted end of the wick.

Select a drill bit slightly smaller than your plait and use it to drill a hole on the coke lid.

Feed the non-lighting end of the wick through the hole. You may have to cut off the knot to do so. If so, retie it when the wick is fully through.

Fill the bottle half full with torch fuel, insert the wick and wait for the fuel to soak up the wick.

Light it and have fun.