Coin Ring

There are many great video's on people's techniques and tips,..watch them,...but doing is the only way to get these uniform.

1. Start with the coin of your choice,...quarters are good to start with.

2. Stamp a hole in the center of the coin

3. Using tweezers, hold coin in a flame until it glows,...then drop in water

one in water it is immediately cool to the touch......

Place on a ring mandrel and start pounding (downwards) with a plastic hammer.

-------=this is the challenge and determination part---------

continue to hammer until one size below your desired ring sizing.

then remove coin/ring place on mandrel other side down.

Hammer to desired diameter and then smooth out with sanding blocks!

Cheap but labor intensive!!!