Coffee Table Pallet Project

Check out this fantastic Coffee Table Pallet Project Tutorial today.

This Coffee Table Pallet Project is easy to follow and can be made by virtually anyone. All you need is some nails, paint and pallet boards!

Pallet
Screws / Nails
Paint

Mark the pallet boards ready for cutting

We need the following lengths

• 2 x 17" inches
• 2 x 24" inches

Attach the 4 boards together with screws or nails to make a rectangle shape

Attached a pallet board with screws or nails to the bottom of the rectangle shape.

The pallet board should measure 30" inches

You need to attached a supporting board to the bottom board... this needs to be 17" inches high

Use screws / nails to attach the board into position

Attach a small board to make a T Shape - this board measure approximately 15" inches in length

This board will be used to attach the coffee table top

You need to screw or nail the top boards into position - they are 39.5" inches in length

Screw the board underneath the rectangle shape, but above the "T shape" at the bottom end - this gives the illusion that the coffee table is "floating'

Next you need to paint the boards, you can sand them if you want before painting for a smooth finish. I have left them in a natural state and used Black and White paint.

You can use your coffee table indoors, in the garden or anywhere you like!